Hi,
I tried to load Ridgerun SDK with demo and during the first boot got a kernel panic and now the board is bricked.
First I tried to restore using the flash utility over /dev/ttyS0 as described in "How to bring back your bricked Leopard". It took a long time to complete -nanderase and then went in a loop.
Then I tried SD card flashing. I don't have a SD reader on my linux machine so used a USB adapter. formatted /dev/sdb and then mounted /dev/sdb1 to /media/disk and added boot data. Nothing happened when booting from SD card.
When I do minicom in UART boot mode I get "BOOTME BOOTME BOOTME ..."
How do I restore the uboot?
This is the message I get when booting with SW1 OFF and SW2 ON
SD card boot and flashing tool for DM355 and DM365
by Constantine Shulyupin http://www.LinuxDriver.co.il/
Online manual: wiki.davincidsp.com/.../SD_card_boot_and_flashing_t5
based on TI DM35x FlashAndBootUtils 1.10 SFT, TI flash_utils and SpectrumDigita5
Compiled on Nov 14 2010 at 21:58:05 with gcc 4.2.0 (MontaVista 4.2.0-16.0.32.08)
SYSTEM->DEVICE_ID=0x0B73B02F
DM355_MHZ=216 DDR_MHZ=171
PLL1->PLLM=143 PLL2->PLLM=113 PLL1->PLLDIV3=0x0000800F DDR->SDTIMR=0x2A923249 D3
&EMIFStart=0x02000000
nand->devID=0x000000DA nand->dataBytesPerPage=2048 nand->pagesPerBlock=64 nand-6
sdcard_init
sdcard_read sdc_src=0x00001000 dst=0x80001044 len=0x00000200 dst + len=0x800012
If you get "BOOTME BOOTME...", do a reset