Installing Bootloader Problem - Software - Leopardboard

Yes, I think that uboot doesn't recognize the keyboard. I tried severals times, with different keys, before the end of the countdown, but I continued to have "TFTP from server... Filename uImage ...." and not the prompt.

I pasted the output of "dmesg", I made tabs/spaces to see where my keyboard appears.

Should I try with an other keyboard?

[ 0.004210] ... max period: 000000007fffffff

[ 0.004212] ... fixed-purpose events: 3

[ 0.004213] ... event mask: 0000000700000003

[ 0.004218] Checking 'hlt' instruction... OK.

[ 0.022233] ACPI: Core revision 20090903

[ 0.032006] ftrace: converting mcount calls to 0f 1f 44 00 00

[ 0.032011] ftrace: allocating 21776 entries in 43 pages

[ 0.036040] Enabling APIC mode: Flat. Using 1 I/O APICs

[ 0.036338] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.076684] CPU0: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz stepping 0a

[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000

[ 0.008000] Initializing CPU#1

[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K

[ 0.008000] CPU: L2 cache: 3072K

[ 0.008000] CPU: Physical Processor ID: 0

[ 0.008000] CPU: Processor Core ID: 1

[ 0.008000] CPU1: Thermal monitoring enabled (TM2)

[ 0.164053] CPU1: Intel(R) Core(TM)2 Duo CPU E7400 @ 2.80GHz stepping 0a

[ 0.164062] checking TSC synchronization [CPU#0 -> CPU#1]: passed.

[ 0.168017] Brought up 2 CPUs

[ 0.168019] Total of 2 processors activated (11172.07 BogoMIPS).

[ 0.168539] CPU0 attaching sched-domain:

[ 0.168541] domain 0: span 0-1 level MC

[ 0.168543] groups: 0 1

[ 0.168548] CPU1 attaching sched-domain:

[ 0.168549] domain 0: span 0-1 level MC

[ 0.168551] groups: 1 0

[ 0.168628] devtmpfs: initialized

[ 0.168628] regulator: core version 0.5

[ 0.168628] Time: 8:23:26 Date: 07/09/10

[ 0.168628] NET: Registered protocol family 16

[ 0.168628] Trying to unpack rootfs image as initramfs...

[ 0.168628] EISA bus registered

[ 0.168628] ACPI: bus type pci registered

[ 0.168628] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255

[ 0.168628] PCI: Not using MMCONFIG.

[ 0.168628] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3

[ 0.168628] PCI: Using configuration type 1 for base access

[ 0.172071] bio: create slab <bio-0> at 0

[ 0.172835] ACPI: EC: Look up EC in DSDT

[ 0.176422] ACPI: Executed 1 blocks of module-level executable AML code

[ 0.180840] ACPI: Interpreter enabled

[ 0.180848] ACPI: (supports S0 S3 S4 S5)

[ 0.180864] ACPI: Using IOAPIC for interrupt routing

[ 0.180909] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255

[ 0.185893] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources

[ 0.185895] PCI: Using MMCONFIG for extended config space

[ 0.193781] ACPI Warning: Incorrect checksum in table [OEMB] - D5, should be D4 (20090903/tbutils-314)

[ 0.194553] ACPI: No dock devices found.

[ 0.194793] ACPI: PCI Root Bridge [PCI0] (0000:00)

[ 0.194863] pci 0000:00:02.0: reg 10 64bit mmio: [0xfe400000-0xfe7fffff]

[ 0.194868] pci 0000:00:02.0: reg 18 64bit mmio pref: [0xd0000000-0xdfffffff]

[ 0.194872] pci 0000:00:02.0: reg 20 io port: [0xdc00-0xdc07]

[ 0.194902] pci 0000:00:02.1: reg 10 64bit mmio: [0xfe900000-0xfe9fffff]

[ 0.194982] pci 0000:00:1a.0: reg 20 io port: [0xd880-0xd89f]

[ 0.195042] pci 0000:00:1a.1: reg 20 io port: [0xd800-0xd81f]

[ 0.195102] pci 0000:00:1a.2: reg 20 io port: [0xd480-0xd49f]

[ 0.195166] pci 0000:00:1a.7: reg 10 32bit mmio: [0xfeafbc00-0xfeafbfff]

[ 0.195217] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold

[ 0.195221] pci 0000:00:1a.7: PME# disabled

[ 0.195256] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfeaf4000-0xfeaf7fff]

[ 0.195291] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[ 0.195294] pci 0000:00:1b.0: PME# disabled

[ 0.195348] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[ 0.195351] pci 0000:00:1c.0: PME# disabled

[ 0.195407] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold

[ 0.195410] pci 0000:00:1c.2: PME# disabled

[ 0.195462] pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f]

[ 0.195522] pci 0000:00:1d.1: reg 20 io port: [0xd080-0xd09f]

[ 0.195583] pci 0000:00:1d.2: reg 20 io port: [0xd000-0xd01f]

[ 0.195647] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfeafb800-0xfeafbbff]

[ 0.195699] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold

[ 0.195703] pci 0000:00:1d.7: PME# disabled

[ 0.195812] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO

[ 0.195815] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO

[ 0.195818] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0280 (mask 00ff)

[ 0.195821] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0a20 (mask 003f)

[ 0.195876] pci 0000:00:1f.2: reg 10 io port: [0xcc00-0xcc07]

[ 0.195881] pci 0000:00:1f.2: reg 14 io port: [0xc880-0xc883]

[ 0.195886] pci 0000:00:1f.2: reg 18 io port: [0xc800-0xc807]

[ 0.195891] pci 0000:00:1f.2: reg 1c io port: [0xc480-0xc483]

[ 0.195896] pci 0000:00:1f.2: reg 20 io port: [0xc400-0xc41f]

[ 0.195901] pci 0000:00:1f.2: reg 24 32bit mmio: [0xfeafb000-0xfeafb7ff]

[ 0.195931] pci 0000:00:1f.2: PME# supported from D3hot

[ 0.195934] pci 0000:00:1f.2: PME# disabled

[ 0.195958] pci 0000:00:1f.3: reg 10 64bit mmio: [0xfeafac00-0xfeafacff]

[ 0.195969] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]

[ 0.196088] pci 0000:02:00.0: reg 10 io port: [0xe800-0xe8ff]

[ 0.196110] pci 0000:02:00.0: reg 18 64bit mmio: [0xfebff000-0xfebfffff]

[ 0.196127] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfdff0000-0xfdffffff]

[ 0.196139] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfebc0000-0xfebdffff]

[ 0.196193] pci 0000:02:00.0: supports D1 D2

[ 0.196195] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.196203] pci 0000:02:00.0: PME# disabled

[ 0.196258] pci 0000:00:1c.2: bridge io port: [0xe000-0xefff]

[ 0.196261] pci 0000:00:1c.2: bridge 32bit mmio: [0xfeb00000-0xfebfffff]

[ 0.196266] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]

[ 0.196309] pci 0000:00:1e.0: transparent bridge

[ 0.196327] pci_bus 0000:00: on NUMA node 0

[ 0.196331] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]

[ 0.196444] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]

[ 0.196556] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]

[ 0.196601] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]

[ 0.209539] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)

[ 0.209632] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)

[ 0.209716] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)

[ 0.209804] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 *15)

[ 0.209894] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.

[ 0.209983] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12 *14 15)

[ 0.210072] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)

[ 0.210159] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)

[ 0.210246] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none

[ 0.210256] vgaarb: loaded

[ 0.210346] SCSI subsystem initialized

[ 0.210417] libata version 3.00 loaded.

[ 0.210473] usbcore: registered new interface driver usbfs

[ 0.210483] usbcore: registered new interface driver hub

[ 0.210505] usbcore: registered new device driver usb

[ 0.210597] ACPI: WMI: Mapper loaded

[ 0.210598] PCI: Using ACPI for IRQ routing

[ 0.210729] NetLabel: Initializing

[ 0.210730] NetLabel: domain hash size = 128

[ 0.210732] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.210741] NetLabel: unlabeled traffic allowed by default

[ 0.210766] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0

[ 0.210770] hpet0: 4 comparators, 64-bit 14.318180 MHz counter

[ 0.216034] Switching to clocksource tsc

[ 0.217579] AppArmor: AppArmor Filesystem Enabled

[ 0.217589] pnp: PnP ACPI init

[ 0.217600] ACPI: bus type pnp registered

[ 0.221370] pnp: PnP ACPI: found 15 devices

[ 0.221372] ACPI: ACPI bus type pnp unregistered

[ 0.221374] PnPBIOS: Disabled by ACPI PNP

[ 0.221385] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved

[ 0.221387] system 00:01: iomem range 0xfed90000-0xfed93fff has been reserved

[ 0.221393] system 00:07: ioport range 0x290-0x29f has been reserved

[ 0.221395] system 00:07: ioport range 0x290-0x29f has been reserved

[ 0.221397] system 00:07: ioport range 0xa20-0xa2f has been reserved

[ 0.221398] system 00:07: ioport range 0xa30-0xa3f has been reserved

[ 0.221403] system 00:08: ioport range 0x4c0-0x4ff has been reserved

[ 0.221405] system 00:08: ioport range 0x800-0x87f has been reserved

[ 0.221407] system 00:08: ioport range 0x480-0x4bf has been reserved

[ 0.221409] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved

[ 0.221411] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved

[ 0.221413] system 00:08: iomem range 0xfed40000-0xfed8ffff has been reserved

[ 0.221418] system 00:0b: iomem range 0xffc00000-0xffefffff has been reserved

[ 0.221422] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved

[ 0.221424] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved

[ 0.221428] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved

[ 0.221432] system 00:0e: iomem range 0x0-0x9ffff could not be reserved

[ 0.221434] system 00:0e: iomem range 0xc0000-0xcffff could not be reserved

[ 0.221436] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved

[ 0.221438] system 00:0e: iomem range 0x100000-0xbddfffff could not be reserved

[ 0.256117] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01

[ 0.256120] pci 0000:00:1c.0: IO window: 0x1000-0x1fff

[ 0.256124] pci 0000:00:1c.0: MEM window: 0xc0000000-0xc01fffff

[ 0.256128] pci 0000:00:1c.0: PREFETCH window: 0x000000c0200000-0x000000c03fffff

[ 0.256133] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:02

[ 0.256136] pci 0000:00:1c.2: IO window: 0xe000-0xefff

[ 0.256140] pci 0000:00:1c.2: MEM window: 0xfeb00000-0xfebfffff

[ 0.256143] pci 0000:00:1c.2: PREFETCH window: 0x000000fdf00000-0x000000fdffffff

[ 0.256148] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03

[ 0.256149] pci 0000:00:1e.0: IO window: disabled

[ 0.256153] pci 0000:00:1e.0: MEM window: disabled

[ 0.256156] pci 0000:00:1e.0: PREFETCH window: disabled

[ 0.256167] pci 0000:00:1c.0: enabling device (0104 -> 0107)

[ 0.256175] alloc irq_desc for 17 on node -1

[ 0.256176] alloc kstat_irqs on node -1

[ 0.256182] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17

[ 0.256186] pci 0000:00:1c.0: setting latency timer to 64

[ 0.256193] alloc irq_desc for 18 on node -1

[ 0.256194] alloc kstat_irqs on node -1

[ 0.256199] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[ 0.256202] pci 0000:00:1c.2: setting latency timer to 64

[ 0.256207] pci 0000:00:1e.0: setting latency timer to 64

[ 0.256211] pci_bus 0000:00: resource 0 io: [0x00-0xffff]

[ 0.256213] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]

[ 0.256215] pci_bus 0000:01: resource 0 io: [0x1000-0x1fff]

[ 0.256217] pci_bus 0000:01: resource 1 mem: [0xc0000000-0xc01fffff]

[ 0.256219] pci_bus 0000:01: resource 2 pref mem [0xc0200000-0xc03fffff]

[ 0.256221] pci_bus 0000:02: resource 0 io: [0xe000-0xefff]

[ 0.256222] pci_bus 0000:02: resource 1 mem: [0xfeb00000-0xfebfffff]

[ 0.256224] pci_bus 0000:02: resource 2 pref mem [0xfdf00000-0xfdffffff]

[ 0.256226] pci_bus 0000:03: resource 3 io: [0x00-0xffff]

[ 0.256228] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]

[ 0.256259] NET: Registered protocol family 2

[ 0.256340] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

[ 0.256601] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.257014] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

[ 0.257224] TCP: Hash tables configured (established 131072 bind 65536)

[ 0.257226] TCP reno registered

[ 0.257287] NET: Registered protocol family 1

[ 0.257301] pci 0000:00:02.0: Boot video device

[ 0.257541] cpufreq-nforce2: No nForce2 chipset.

[ 0.257560] Scanning for low memory corruption every 60 seconds

[ 0.257652] audit: initializing netlink socket (disabled)

[ 0.257660] type=2000 audit(1278663806.255:1): initialized

[ 0.264911] highmem bounce pool size: 64 pages

[ 0.264916] HugeTLB registered 4 MB page size, pre-allocated 0 pages

[ 0.266014] VFS: Disk quotas dquot_6.5.2

[ 0.266057] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 0.266474] fuse init (API version 7.13)

[ 0.266536] msgmni has been set to 1664

[ 0.266690] alg: No test for stdrng (krng)

[ 0.266729] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[ 0.266731] io scheduler noop registered

[ 0.266732] io scheduler anticipatory registered

[ 0.266734] io scheduler deadline registered

[ 0.266764] io scheduler cfq registered (default)

[ 0.266871] alloc irq_desc for 24 on node -1

[ 0.266872] alloc kstat_irqs on node -1

[ 0.266880] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X

[ 0.266888] pcieport 0000:00:1c.0: setting latency timer to 64

[ 0.266982] alloc irq_desc for 25 on node -1

[ 0.266983] alloc kstat_irqs on node -1

[ 0.266989] pcieport 0000:00:1c.2: irq 25 for MSI/MSI-X

[ 0.266996] pcieport 0000:00:1c.2: setting latency timer to 64

[ 0.267063] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 0.267078] Firmware did not grant requested _OSC control

[ 0.267091] Firmware did not grant requested _OSC control

[ 0.267111] Firmware did not grant requested _OSC control

[ 0.267120] Firmware did not grant requested _OSC control

[ 0.267130] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[ 0.267209] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0

[ 0.267212] ACPI: Power Button [PWRB]

[ 0.267245] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1

[ 0.267247] ACPI: Power Button [PWRF]

[ 0.267830] ACPI: SSDT bdd700f0 002B9 (v01 DpgPmm P001Ist 00000011 INTL 20051117)

[ 0.268217] ACPI: SSDT bdd70670 004B2 (v01 PmRef P001Cst 00003001 INTL 20051117)

[ 0.268493] Monitor-Mwait will be used to enter C-1 state

[ 0.268510] Monitor-Mwait will be used to enter C-2 state

[ 0.268525] Monitor-Mwait will be used to enter C-3 state

[ 0.268530] Marking TSC unstable due to TSC halts in idle

[ 0.268568] processor LNXCPU:00: registered as cooling_device0

[ 0.268899] ACPI: SSDT bdd703b0 002B9 (v01 DpgPmm P002Ist 00000012 INTL 20051117)

[ 0.269166] ACPI: SSDT bdd70b30 00085 (v01 PmRef P002Cst 00003000 INTL 20051117)

[ 0.269469] Switching to clocksource hpet

[ 0.269809] processor LNXCPU:01: registered as cooling_device1

[ 0.274825] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 0.274912] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 0.275185] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 0.276028] brd: module loaded

[ 0.276361] loop: module loaded

[ 0.276420] input: Macintosh mouse button emulation as /devices/virtual/input/input2

[ 0.276724] Fixed MDIO Bus: probed

[ 0.276749] PPP generic driver version 2.4.2

[ 0.276773] tun: Universal TUN/TAP device driver, 1.6

[ 0.276829] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 0.276850] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[ 0.276858] ehci_hcd 0000:00:1a.7: setting latency timer to 64

[ 0.276861] ehci_hcd 0000:00:1a.7: EHCI Host Controller

[ 0.276883] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1

[ 0.276904] ehci_hcd 0000:00:1a.7: debug port 1

[ 0.280568] isapnp: Scanning for PnP cards...

[ 0.280796] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported

[ 0.280808] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfeafbc00

[ 0.296084] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00

[ 0.296172] usb usb1: configuration #1 chosen from 1 choice

[ 0.296194] hub 1-0:1.0: USB hub found

[ 0.296200] hub 1-0:1.0: 6 ports detected

[ 0.296252] alloc irq_desc for 23 on node -1

[ 0.296254] alloc kstat_irqs on node -1

[ 0.296259] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23

[ 0.296272] ehci_hcd 0000:00:1d.7: setting latency timer to 64

[ 0.296275] ehci_hcd 0000:00:1d.7: EHCI Host Controller

[ 0.296304] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2

[ 0.296324] ehci_hcd 0000:00:1d.7: debug port 1

[ 0.300205] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported

[ 0.300216] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfeafb800

[ 0.324019] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00

[ 0.324109] usb usb2: configuration #1 chosen from 1 choice

[ 0.324131] hub 2-0:1.0: USB hub found

[ 0.324138] hub 2-0:1.0: 6 ports detected

[ 0.324189] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 0.324203] uhci_hcd: USB Universal Host Controller Interface driver

[ 0.324239] alloc irq_desc for 16 on node -1

[ 0.324240] alloc kstat_irqs on node -1

[ 0.324246] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 0.324253] uhci_hcd 0000:00:1a.0: setting latency timer to 64

[ 0.324256] uhci_hcd 0000:00:1a.0: UHCI Host Controller

[ 0.324282] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3

[ 0.324310] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000d880

[ 0.324373] usb usb3: configuration #1 chosen from 1 choice

[ 0.324391] hub 3-0:1.0: USB hub found

[ 0.324395] hub 3-0:1.0: 2 ports detected

[ 0.324427] alloc irq_desc for 21 on node -1

[ 0.324429] alloc kstat_irqs on node -1

[ 0.324432] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21

[ 0.324436] uhci_hcd 0000:00:1a.1: setting latency timer to 64

[ 0.324438] uhci_hcd 0000:00:1a.1: UHCI Host Controller

[ 0.324465] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4

[ 0.324489] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d800

[ 0.324552] usb usb4: configuration #1 chosen from 1 choice

[ 0.324570] hub 4-0:1.0: USB hub found

[ 0.324574] hub 4-0:1.0: 2 ports detected

[ 0.324606] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 17 (level, low) -> IRQ 17

[ 0.324610] uhci_hcd 0000:00:1a.2: setting latency timer to 64

[ 0.324612] uhci_hcd 0000:00:1a.2: UHCI Host Controller

[ 0.324634] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5

[ 0.324658] uhci_hcd 0000:00:1a.2: irq 17, io base 0x0000d480

[ 0.324716] usb usb5: configuration #1 chosen from 1 choice

[ 0.324733] hub 5-0:1.0: USB hub found

[ 0.324738] hub 5-0:1.0: 2 ports detected

[ 0.324774] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23

[ 0.324778] uhci_hcd 0000:00:1d.0: setting latency timer to 64

[ 0.324780] uhci_hcd 0000:00:1d.0: UHCI Host Controller

[ 0.324804] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6

[ 0.324822] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400

[ 0.324881] usb usb6: configuration #1 chosen from 1 choice

[ 0.324899] hub 6-0:1.0: USB hub found

[ 0.324903] hub 6-0:1.0: 2 ports detected

[ 0.324936] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18

[ 0.324940] uhci_hcd 0000:00:1d.1: setting latency timer to 64

[ 0.324942] uhci_hcd 0000:00:1d.1: UHCI Host Controller

[ 0.324962] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7

[ 0.324981] uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000d080

[ 0.325041] usb usb7: configuration #1 chosen from 1 choice

[ 0.325060] hub 7-0:1.0: USB hub found

[ 0.325064] hub 7-0:1.0: 2 ports detected

[ 0.325094] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18

[ 0.325098] uhci_hcd 0000:00:1d.2: setting latency timer to 64

[ 0.325100] uhci_hcd 0000:00:1d.2: UHCI Host Controller

[ 0.325121] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8

[ 0.325140] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000

[ 0.325198] usb usb8: configuration #1 chosen from 1 choice

[ 0.325216] hub 8-0:1.0: USB hub found

[ 0.325220] hub 8-0:1.0: 2 ports detected

[ 0.325293] PNP: No PS/2 controller found. Probing ports directly.

[ 0.325644] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 0.325648] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 0.325702] mice: PS/2 mouse device common for all mice

[ 0.325780] rtc_cmos 00:03: RTC can wake from S4

[ 0.325807] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0

[ 0.325827] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs

[ 0.325900] device-mapper: uevent: version 1.0.3

[ 0.325975] Freeing initrd memory: 7789k freed

[ 0.329408] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com

[ 0.329487] device-mapper: multipath: version 1.1.0 loaded

[ 0.329489] device-mapper: multipath round-robin: version 1.0.0 loaded

[ 0.329588] EISA: Probing bus 0 at eisa.0

[ 0.329594] Cannot allocate resource for EISA slot 1

[ 0.329613] EISA: Detected 0 cards.

[ 0.329721] cpuidle: using governor ladder

[ 0.329807] cpuidle: using governor menu

[ 0.330147] TCP cubic registered

[ 0.330256] NET: Registered protocol family 10

[ 0.330622] lo: Disabled Privacy Extensions

[ 0.330866] NET: Registered protocol family 17

[ 0.331325] Using IPI No-Shortcut mode

[ 0.331375] PM: Resume from disk failed.

[ 0.331390] registered taskstats version 1

[ 0.331680] Magic number: 2:351:371

[ 0.331764] rtc_cmos 00:03: setting system clock to 2010-07-09 08:23:27 UTC (1278663807)

[ 0.331767] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found

[ 0.331768] EDD information not available.

[ 0.634224] isapnp: No Plug & Play device found

[ 0.634248] Freeing unused kernel memory: 660k freed

[ 0.634633] Write protecting the kernel text: 4680k

[ 0.634670] Write protecting the kernel read-only data: 1840k

[ 0.646148] udev: starting version 151

[ 0.692186] ahci 0000:00:1f.2: version 3.0

[ 0.692203] alloc irq_desc for 19 on node -1

[ 0.692205] alloc kstat_irqs on node -1

[ 0.692211] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19

[ 0.692239] alloc irq_desc for 26 on node -1

[ 0.692240] alloc kstat_irqs on node -1

[ 0.692247] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X

[ 0.692288] ahci: SSS flag set, parallel bus scan disabled

[ 0.692318] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode

[ 0.692320] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs

[ 0.692324] ahci 0000:00:1f.2: setting latency timer to 64

[ 0.710564] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[ 0.710597] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18

[ 0.710642] r8169 0000:02:00.0: setting latency timer to 64

[ 0.710690] alloc irq_desc for 27 on node -1

[ 0.710692] alloc kstat_irqs on node -1

[ 0.710708] r8169 0000:02:00.0: irq 27 for MSI/MSI-X

[ 0.711228] eth0: RTL8168c/8111c at 0xf808a000, 00:21:9b:1c:04:46, XID 1c4000c0 IRQ 27

[ 0.736578] scsi0 : ahci

[ 0.736754] scsi1 : ahci

[ 0.736799] scsi2 : ahci

[ 0.736840] scsi3 : ahci

[ 0.736881] scsi4 : ahci

[ 0.736923] scsi5 : ahci

[ 0.737049] ata1: SATA max UDMA/133 abar m2048@0xfeafb000 port 0xfeafb100 irq 26

[ 0.737051] ata2: SATA max UDMA/133 abar m2048@0xfeafb000 port 0xfeafb180 irq 26

[ 0.737053] ata3: SATA max UDMA/133 abar m2048@0xfeafb000 port 0xfeafb200 irq 26

[ 0.737055] ata4: SATA max UDMA/133 abar m2048@0xfeafb000 port 0xfeafb280 irq 26

[ 0.737058] ata5: SATA max UDMA/133 abar m2048@0xfeafb000 port 0xfeafb300 irq 26

[ 0.737060] ata6: SATA max UDMA/133 abar m2048@0xfeafb000 port 0xfeafb380 irq 26

[ 0.868042] usb 4-1: new low speed USB device using uhci_hcd and address 2

[ 1.042621] usb 4-1: configuration #1 chosen from 1 choice

[ 1.056036] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 1.084634] ata1.00: ATA-8: ST3320613AS, DE13, max UDMA/133

[ 1.084638] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)

[ 1.126426] ata1.00: configured for UDMA/133

[ 1.140182] scsi 0:0:0:0: Direct-Access ATA ST3320613AS DE13 PQ: 0 ANSI: 5

[ 1.140289] sd 0:0:0:0: Attached scsi generic sg0 type 0

[ 1.140349] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)

[ 1.140381] sd 0:0:0:0: [sda] Write Protect is off

[ 1.140383] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 1.140399] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.140493] sda: sda1 sda2 sda3 < sda5 sda6 >

[ 1.202533] sd 0:0:0:0: [sda] Attached SCSI disk

[ 1.284042] usb 4-2: new low speed USB device using uhci_hcd and address 3

[ 1.459600] usb 4-2: configuration #1 chosen from 1 choice

[ 1.466330] usbcore: registered new interface driver hiddev

[ 1.480804] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1a.1/usb4/4-1/4-1:1.0/input/input3

[ 1.480851] generic-usb 0003:413C:2003.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.1-1/input0

[ 1.492739] input: Dell Dell USB Optical Mouse as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.0/input/input4

[ 1.492808] generic-usb 0003:413C:3012.0002: input,hidraw1: USB HID v1.11 Mouse [Dell Dell USB Optical Mouse] on usb-0000:00:1a.1-2/input0

[ 1.492820] usbcore: registered new interface driver usbhid

[ 1.492822] usbhid: v2.6:USB HID core driver

[ 1.864100] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 1.864317] ata2.00: ATAPI: PLDS DVD+/-RW DH-16A6S, YD11, max UDMA/100

[ 1.865058] ata2.00: configured for UDMA/100

[ 1.881112] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DH-16A6S YD11 PQ: 0 ANSI: 5

[ 1.886316] sr0: scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray

[ 1.886320] Uniform CD-ROM driver Revision: 3.20

[ 1.886422] sr 1:0:0:0: Attached scsi CD-ROM sr0

[ 1.886478] sr 1:0:0:0: Attached scsi generic sg1 type 5

[ 2.204097] ata3: SATA link down (SStatus 0 SControl 300)

[ 2.540088] ata4: SATA link down (SStatus 0 SControl 300)

[ 2.876089] ata5: SATA link down (SStatus 0 SControl 300)

[ 3.212097] ata6: SATA link down (SStatus 0 SControl 300)

[ 3.725940] EXT4-fs (sda5): INFO: recovery required on readonly filesystem

[ 3.725944] EXT4-fs (sda5): write access will be enabled during recovery

[ 6.817144] EXT4-fs (sda5): orphan cleanup on readonly fs

[ 7.006974] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2747270

[ 7.007057] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2747327

[ 7.013879] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2747301

[ 7.013903] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2747299

[ 7.013960] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2747295

[ 7.013982] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2747263

[ 7.014003] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2747253

[ 7.014026] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2747249

[ 7.014037] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2747247

[ 7.014050] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2747201

[ 7.014061] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2747195

[ 7.014073] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2747187

[ 7.014103] EXT4-fs (sda5): ext4_orphan_cleanup: deleting unreferenced inode 2747386

[ 7.264056] EXT4-fs (sda5): 13 orphan inodes deleted

[ 7.264061] EXT4-fs (sda5): recovery complete

[ 7.302145] EXT4-fs (sda5): mounted filesystem with ordered data mode

[ 16.454697] udev: starting version 151

[ 16.541910] Linux agpgart interface v0.103

[ 16.543927] agpgart-intel 0000:00:00.0: Intel G45/G43 Chipset

[ 16.544698] agpgart-intel 0000:00:00.0: detected 32764K stolen memory

[ 16.576398] Adding 2077688k swap on /dev/sda6. Priority:-1 extents:1 across:2077688k

[ 16.627898] type=1505 audit(1278656623.792:2): operation="profile_load" pid=644 name="/sbin/dhclient3"

[ 16.628388] type=1505 audit(1278656623.796:3): operation="profile_load" pid=644 name="/usr/lib/NetworkManager/nm-dhcp-client.action"

[ 16.628687] type=1505 audit(1278656623.796:4): operation="profile_load" pid=644 name="/usr/lib/connman/scripts/dhclient-script"

[ 16.642134] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)

[ 16.642156] [drm] Initialized drm 1.1.0 20060810

[ 16.651192] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000

[ 16.694388] dell-wmi: No known WMI GUID found

[ 16.699257] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[ 16.699261] i915 0000:00:02.0: setting latency timer to 64

[ 16.708416] lp: driver loaded but no devices found

[ 16.712104] alloc irq_desc for 28 on node -1

[ 16.712107] alloc kstat_irqs on node -1

[ 16.712113] i915 0000:00:02.0: irq 28 for MSI/MSI-X

[ 16.712119] [drm] set up 31M of stolen space

[ 16.881624] fb0: inteldrmfb frame buffer device

[ 16.881627] registered panic notifier

[ 16.881704] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

[ 16.881739] alloc irq_desc for 22 on node -1

[ 16.881740] alloc kstat_irqs on node -1

[ 16.881746] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22

[ 16.881768] HDA Intel 0000:00:1b.0: setting latency timer to 64

[ 16.883323] vga16fb: initializing

[ 16.883332] vga16fb: mapped to 0xc00a0000

[ 16.883335] vga16fb: not registering due to another framebuffer present

[ 16.987188] hda_codec: ALC662 rev1: BIOS auto-probing.

[ 16.988680] Console: switching to colour frame buffer device 180x56

[ 16.988773] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5

[ 17.294189] type=1505 audit(1278656624.460:5): operation="profile_load" pid=894 name="/usr/share/gdm/guest-session/Xsession"

[ 17.295352] type=1505 audit(1278656624.460:6): operation="profile_replace" pid=895 name="/sbin/dhclient3"

[ 17.295844] type=1505 audit(1278656624.460:7): operation="profile_replace" pid=895 name="/usr/lib/NetworkManager/nm-dhcp-client.action"

[ 17.296109] type=1505 audit(1278656624.464:8): operation="profile_replace" pid=895 name="/usr/lib/connman/scripts/dhclient-script"

[ 17.300190] type=1505 audit(1278656624.468:9): operation="profile_load" pid=896 name="/usr/bin/evince"

[ 17.306653] type=1505 audit(1278656624.472:10): operation="profile_load" pid=896 name="/usr/bin/evince-previewer"

[ 17.310563] type=1505 audit(1278656624.476:11): operation="profile_load" pid=896 name="/usr/bin/evince-thumbnailer"

[ 17.333198] r8169: eth0: link up

[ 17.333206] r8169: eth0: link up

[ 17.448292] RPC: Registered udp transport module.

[ 17.448295] RPC: Registered tcp transport module.

[ 17.448296] RPC: Registered tcp NFSv4.1 backchannel transport module.

[ 17.511823] svc: failed to register lockdv1 RPC service (errno 97).

[ 17.512599] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory

[ 17.538361] NFSD: starting 90-second grace period

[ 17.909464] ppdev: user-space parallel port driver

[ 18.076091] CPU0 attaching NULL sched-domain.

[ 18.076096] CPU1 attaching NULL sched-domain.

[ 18.088609] CPU0 attaching sched-domain:

[ 18.088614] domain 0: span 0-1 level MC

[ 18.088617] groups: 0 1

[ 18.088624] CPU1 attaching sched-domain:

[ 18.088626] domain 0: span 0-1 level MC

[ 18.088629] groups: 1 0

[ 19.858106] CPU0 attaching NULL sched-domain.

[ 19.858111] CPU1 attaching NULL sched-domain.

[ 19.881415] CPU0 attaching sched-domain:

[ 19.881418] domain 0: span 0-1 level MC

[ 19.881420] groups: 0 1

[ 19.881425] CPU1 attaching sched-domain:

[ 19.881426] domain 0: span 0-1 level MC

[ 19.881428] groups: 1 0

[ 27.720043] eth0: no IPv6 routers present

Thank you for your help. I hope we will find a solution