I had an idea to plug two cameras to the Leo 365 board.
My idea is to have the usual HD camera (for example LI-5M04CM) on the ISIF port and run it in full like in the RidgeRun SDK or IPNC demo.
As for the second camera, I would choose one of these from Sparkfun:
I would connect their parallel output to a GPIO port of the DM365. Of course I would also share the I2C signals with the board as well as the power supply.
My goal is capture some video (30fps ideally) with these VGA camera (CIF format is OK for my application) and save them on a SD card for example, no compression/processing needed.
Do you thing it would be feasible?