Hello, When running a basic Gstreamer test on my Leopard Board 365 (getting a random image then streaming it), I get an error: > gst-launch -v videotestsrc ! TIVidenc1 codecName=h264enc engineName=codecServer ! rtph264pay pt=96 ! udpsink host=192.168.1.101 port=5000 Setting pipeline...

Hi Miguel, Like the news about the release. Your list of features above indicate support for AutoFocus. Is that specific for MT9T031 only? Is there any place we can get more info how to interface drive the AutoFocus? Thanks,

Hello: I be programming, an application, which only need caputre the image of the VGA camera and store the data on the SD card, not transmit. Is there any example on the web, especially to write to the SD card. Thank you very much

Hello, I had an idea to plug two cameras to the Leo 365 board. My idea is to have the usual HD camera (for example LI-5M04CM) on the ISIF port and run it in full like in the RidgeRun SDK or IPNC demo. As for the second camera, I would choose one of these from Sparkfun: http://www.sparkfun...

Hello, I have been having trouble getting my camera to run at 60 fps at VGA resolution. The camera's clock is getting to set to 24MHz instead of 27MHz and I'm not sure where to correct this. Also, I already adjusted the sensor's driver to the minimum horizontal and vertical blanking...

Hi all, I'd like to use a Leopard board for an application that combines video with external sensor data. I'm making a small sensor board that plugs into the expansion port on the Leopard, which will provide sensor data on request, but it's vital that the data is synchronised accurately...

Hi, I'm planning to buy a Leopard board for our current project which needs to calculate the sharpness of the image being captured by the camera. A VGA or a 1.3M camera resolution will be sufficient for our requirements. I think the Auto Focus engine inside the Hardware 3A (H3A) module should...