Booting problem with LEO365 (BOOTP message)

Booting problem with LEO365 (BOOTP message)

  • Hello

    Ive been having a problem with my Leopardboard 365 lately. After a full make install is completed I open up the minicom and reset the board and after autoboot countdown it posts this:

    DM36x initialization passed!                                                  
    UBL customized by RidgeRun                                                    
    TI UBL Version: 1.50                                                          
    Booting Catalog Boot Loader                                                   
    BootMode = NAND                                                               
    Starting NAND Copy...                                                         
    Valid magicnum, 0xA1ACED66, found in block 0x00000004.                        
       DONE                                                                       
    Jumping to entry point at 0x81080000.                                         
                                                                                  
    U-Boot customized by RidgeRun                                                 
                                                                                  
                                                                                  
    U-Boot 1.3.4-svn74 (Jan 26 2011 - 02:52:39)                                   
                                                                                  
    I2C:   ready                                                                  
    DRAM:  128 MB                                                                 
    NAND:  NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,)
    Bad block table found at page 131008, version 0x01                            
    Bad block table found at page 130944, version 0x01                            
    256 MiB                                                                       
    In:    serial                                                                 
    Out:   serial                                                                 
    Err:   serial                                                                 
    Ethernet PHY: GENERIC @ 0x00                                                  
    Hit any key to stop autoboot:  0                                              
    BOOTP broadcast 1                                                             
    WARN: emac_send_packet: No link                                               
    BOOTP broadcast 2                                                             
    WARN: emac_send_packet: No link                                               
    BOOTP broadcast 3                                                             
    WARN: emac_send_packet: No link                                               
    BOOTP broadcast 4                                                             
    WARN: emac_send_packet: No link                                               
    BOOTP broadcast 5                                                             
    WARN: emac_send_packet: No link                                               
    BOOTP broadcast 6                                                             
    WARN: emac_send_packet: No link                                               
    BOOTP broadcast 7                                                             
    WARN: emac_send_packet: No link                                               
    BOOTP broadcast 8                                                             
    WARN: emac_send_packet: No link                                               
    BOOTP broadcast 9                                                             
    WARN: emac_send_packet: No link                                               
    BOOTP broadcast 10                                                            
    WARN: emac_send_packet: No link                                               
                                                                                  
    Retry count exceeded; starting again






    Has anyone had this problem previously? I copy the make process for more information.
    The make process:



    The system is ubuntu-10.04 running in a 32 bit architecture
    SYSID: ubuntu-10.04_32
    Checking for host packages required by the SDK build system:
        buildsystem (build-essential) is installed
        libtool (libtool) is installed
        make (make) is installed
        ncurses (libncurses5-dev) is installed
        texinfo (texinfo) is installed
        minicom (minicom) is installed
        perl (perl) is installed
        quilt (quilt) is installed
        dc (dc) is installed
        subversion (subversion) is installed
        curl (curl) is installed
        quilt (quilt) is installed
        libusb (libusb-dev) is installed
        perl-expect (libexpect-perl) is installed
        mono (mono-devel) is installed

    Running initial configuration to load default values...

      Ridgerun Linux SDK
      Board configuration: Leopard Board DM365
     
      Processing toolchain...
      Processing kernel...
        Switching to kernel patchset: leopard-kernel-2.6.32
        Now in patchset: leopard-kernel-2.6.32
        Applying quilt patches to the kernel linux-2.6.32...
      
    Applying patch rr-sdk-integration.patch
    Applying patch 0007-Patch-MMAP-buffer-bufsize-support-upto-1080p-resolut.patch
    Applying patch 0006-DM365-capture-MMAP-buffer-allocation.patch
    Applying patch 0005-DM365-MMAP-buffer-allocation-for-display-driver.patch
    Applying patch Support-enumframe.patch
    Applying patch add_mt9p031_sensor_support.patch
    Applying patch leopard-dm365-support.patch
    Applying patch audio-mclk.patch
    Applying patch add_dvi_output.patch
    Applying patch usb_leopard_support.patch
    Now at patch usb_leopard_support.patch
      
      Processing fs...
        Entering host-apps...
        Entering apps...
        Entering /home/beto/work/leo365/toolchain...
        Entering arch...
        Entering mach...
        Entering proprietary_src...
        Entering myapps...
      Processing bootloader...
      Processing installer...
    init/Kconfig:1:warning: environment variable ARCH undefined
    init/Kconfig:5:warning: environment variable KERNELVERSION undefined


    *** End of SDK configuration.


      Ridgerun Linux SDK
      Board configuration: Leopard Board DM365
     
      Processing toolchain...
        Build complete
      Processing kernel...
      Generating include/asm-arm/mach-types.h
    <stdin>:1351:2: warning: #warning syscall migrate_pages not implemented
    scripts/mod/modpost.c: In function ‘get_markers’:
    scripts/mod/modpost.c:1562: warning: ignoring return value of ‘asprintf’, declared with attribute warn_unused_result
    scripts/mod/modpost.c: In function ‘add_marker’:
    scripts/mod/modpost.c:1982: warning: ignoring return value of ‘asprintf’, declared with attribute warn_unused_result
    scripts/kallsyms.c: In function ‘read_symbol’:
    scripts/kallsyms.c:112: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result
    arch/arm/mm/mmu.c: In function ‘sanity_check_meminfo’:
    arch/arm/mm/mmu.c:690: warning: unused variable ‘highmem’
    fs/autofs4/symlink.c: In function ‘autofs4_follow_link’:
    fs/autofs4/symlink.c:18: warning: passing argument 2 of ‘nd_set_link’ discards qualifiers from pointer target type
    drivers/input/input.c:1277: warning: ‘input_dev_reset’ defined but not used
    drivers/media/video/mt9p031.c:378: warning: ‘get_shutter’ defined but not used
    drivers/spi/davinci_spi.c: In function ‘davinci_spi_bufs_dma’:
    drivers/spi/davinci_spi.c:732: warning: passing argument 2 of ‘dma_map_single’ discards qualifiers from pointer target type
    net/ethernet/eth.c:402: warning: ‘print_mac’ is deprecated (declared at net/ethernet/eth.c:398)
    net/ethernet/eth.c:402: warning: ‘print_mac’ is deprecated (declared at net/ethernet/eth.c:398)
      Kernel: arch/arm/boot/Image is ready
      Kernel: arch/arm/boot/zImage is ready
        Build complete
      Processing fs...
        Checking for host packages required by the SDK target applications...
        Host machine has all required packages.
        Base FS directory not found, creating base
          Ridgerun Linux SDK
          Board configuration: Leopard Board DM365
        
          Processing toolchain...
          Processing kernel...
          Processing fs...
            Entering host-apps...
            Entering apps...
              Entering alsa-lib-1.0.21...
              Entering alsa-utils-1.0.21...
              Entering aumix-2.8...
              Entering avahi-0.6.19...
              Entering bash-3.2...
              Entering binutils-2.17...
              Entering bluez-libs-3.20...
              Entering bluez-utils-3.20...
              Entering busybox-1.14.2...
              Entering cherokee-0.99...
              Entering curl-7.16.2...
              Entering DarwinStreamingSrvr6.0.3...
              Entering dbus-1.2.4.6...
              Entering dbus-glib-0.86...
              Entering dejavu-fonts-ttf-2.29...
              Entering dosfstools-2.11...
              Entering dropbear-0.52...
              Entering expat-2.0.0...
              Entering faac-1.26...
              Entering faad2-2.6.1...
              Entering flac-1.2.2...
              Entering freetype-2.3.1...
              Entering fuse-2.6.3...
              Entering gettext-0.16...
              Entering glib-2.16.5...
              Entering gnutls-2.5.8...
              Entering gstd-1.0...
              Entering gst-ffmpeg-0.10.4...
              Entering gst-plugins-bad-0.10.13...
              Entering gst-plugins-base-0.10.23...
              Entering gst-plugins-good-0.10.14...
              Entering gst-plugins-ugly-0.10.11...
              Entering gstreamer-0.10.23...
              Entering gst-tracelib-0.2...
              Entering howl-1.0.0...
              Entering i2c-tools-3.0.2...
              Entering iperf-2.0.2...
              Entering ipipe_init...
              Entering iproute2-2.6.34...
              Entering jpeg-6b...
              Entering lame-3.97...
              Entering libdaemon-0.12...
              Entering libgcrypt-1.4.5...
              Entering libgpg-error-1.7...
              Entering libiconv-1.11...
              Entering libid3tag-0.15.1b...
              Entering libmad-0.15.1b...
              Entering libogg-1.1.3...
              Entering liboil-0.3.15...
              Entering libpng-1.2.8...
              Entering libsoup-2.4...
              Entering libtheora-1.0alpha7...
              Entering libvorbis-1.1.2...
              Entering libxml2-2.6.27...
              Entering live555...
              Entering lrzsz-0.12.21...
              Entering lzo-2.03...
              Entering madplay-0.15.2b...
              Entering mtdutils-1.0.0...
              Entering mtools-4.0.10...
              Entering ncurses-5.6...
              Entering openssl-0.9.8k...
              Entering popt-1.7...
              Entering prelink-0.3.3.1...
              Entering psplash...
              Entering readline-5.2...
              Entering rrtools...
              Entering socketcan...
              Entering sqlite-3.3.12...
              Entering sysvinit...
              Entering tslib-1.0...
              Entering uuid-1.6.2...
              Entering wireless_tools...
              Entering wpa_supplicant-0.6.9...
              Entering zlib-1.2.3...
            Entering /home/beto/work/leo365/toolchain...
            Entering arch...
              Entering base...
    [sudo] password for beto:
    Entering mach...
              Entering base...
            Entering proprietary_src...
              Entering dvsdk_3_10_00...
              Entering gst-dmai-plugins...
            Entering myapps...
              Entering gst-hello-app...
              Entering gst-vala...
              Entering hello...
              Entering hello-vala...
          Processing bootloader...
          Processing installer...
        Creating development fs directory
        Entering host-apps...
        Entering apps...
          Checking dependencies for alsa-lib-1.0.21
          Compiling and installing alsa-lib-1.0.21...
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    ../src/configure: line 18587: CC_NOUNDEFINED: command not found
    libtool: install: warning: remember to run `libtool --finish /usr/lib'
    libtool: install: warning: relinking `smixer-sbase.la'
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.a when searching for -lc
    libtool: install: warning: remember to run `libtool --finish /usr/lib/alsa-lib/smixer'
    libtool: install: warning: relinking `smixer-ac97.la'
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.so when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.a when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.a when searching for -lc
    libtool: install: warning: remember to run `libtool --finish /usr/lib/alsa-lib/smixer'
    libtool: install: warning: relinking `smixer-hda.la'
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.so when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.a when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.a when searching for -lc
    libtool: install: warning: remember to run `libtool --finish /usr/lib/alsa-lib/smixer'
    libtool: install: warning: `../src/libasound.la' has not been installed in `/usr/lib'
          Checking dependencies for alsa-utils-1.0.21
            Checking dependencies for ncurses-5.6
            Compiling and installing ncurses-5.6...
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    configure: WARNING: cross compiling: assume setvbuf params not reversed
    configure: WARNING: Assuming unsigned for type of bool
    Compiling and installing alsa-utils-1.0.21...
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    config.status: WARNING:  '../src/alsaconf/po/Makefile.in' seems to ignore the --datarootdir setting
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libm.a when searching for -lm
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.so when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.a when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.a when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.a when searching for -lc
          Checking dependencies for busybox-1.14.2
          Compiling and installing busybox-1.14.2...
          Checking dependencies for freetype-2.3.1
          Compiling and installing freetype-2.3.1...
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
          Checking dependencies for gettext-0.16
          Compiling and installing gettext-0.16...
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    configure: WARNING: result yes guessed because of cross compilation
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
          Checking dependencies for glib-2.16.5
            Checking dependencies for libiconv-1.11
            Compiling and installing libiconv-1.11...
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    libtool: install: warning: remember to run `libtool --finish /home/beto/work/leo365/fs/fsdev/usr/lib'
    In file included from ../../src/lib/loops.h:24,
                     from ../../src/lib/iconv.c:130:
    ../../src/lib/loop_wchar.h: In function 'wchar_id_loop_convert':
    ../../src/lib/loop_wchar.h:433: warning: unused variable 'cd'
    In file included from ../../src/lib/loops.h:23,
                     from ../../src/lib/iconv.c:130:
    ../../src/lib/loop_unicode.h: In function 'unicode_loop_convert':
    ../../src/lib/loop_unicode.h:325: warning: pointer targets in passing argument 1 of 'cd->fallbacks.mb_to_uc_fallback' differ in signedness
    In file included from ../../src/src/iconv_no_i18n.c:2:
    ../../src/src/iconv.c: In function ‘main’:
    ../../src/src/iconv.c:778: warning: statement with no effect
          Compiling and installing glib-2.16.5...
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    configure: WARNING: *** FAM support will not be built (FAM library not found) ***
          Checking dependencies for gst-plugins-bad-0.10.13
            Checking dependencies for gstreamer-0.10.23
              Checking dependencies for zlib-1.2.3
              Compiling and installing zlib-1.2.3...
              Checking dependencies for libxml2-2.6.27
              Compiling and installing libxml2-2.6.27...
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
            Compiling and installing gstreamer-0.10.23...
    configure: WARNING: unrecognized options: --disable-load-save
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    configure: WARNING: using cross tools not prefixed with host triplet
    configure: WARNING: Sissy ! By asking to not build the tests known to fail, you hereby waive your right to customer support.  If you do not agree with this EULA, please press Ctrl-C before the next line is printed.  By allowing the next line to be printed, you expressly acknowledge your acceptance of this EULA.
    ../src/configure: line 25249: win32/common/config.h-new: No such file or directory
    configure: WARNING: unrecognized options: --disable-load-save
    ../../../src/gst/parse/grammar.y: conflicts: 37 shift/reduce, 5 reduce/reduce
    libtool: install: warning: remember to run `libtool --finish /usr/lib'
    libtool: install: warning: relinking `libgstbase-0.10.la'
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libm.a when searching for -lm
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.a when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/librt.so when searching for -lrt
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/librt.a when searching for -lrt
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.so when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.a when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.a when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.a when searching for -lc
    libtool: install: warning: remember to run `libtool --finish /usr/lib'
    libtool: install: warning: relinking `libgstcontroller-0.10.la'
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.a when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libm.a when searching for -lm
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/librt.so when searching for -lrt
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/librt.a when searching for -lrt
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.so when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.a when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.a when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.a when searching for -lc
    libtool: install: warning: relinking `libgstdataprotocol-0.10.la'
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libm.a when searching for -lm
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.a when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/librt.so when searching for -lrt
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/librt.a when searching for -lrt
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.so when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.a when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.a when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.a when searching for -lc
    libtool: install: warning: relinking `libgstnet-0.10.la'
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libm.a when searching for -lm
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.a when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/librt.so when searching for -lrt
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/librt.a when searching for -lrt
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.so when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.a when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.a when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.a when searching for -lc
    libtool: install: warning: relinking `libgstcoreelements.la'
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libm.a when searching for -lm
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.a when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/librt.so when searching for -lrt
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/librt.a when searching for -lrt
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.so when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.a when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.a when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.a when searching for -lc
    libtool: install: warning: remember to run `libtool --finish /usr/lib/gstreamer-0.10'
    libtool: install: warning: relinking `libgstcoreindexers.la'
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libm.so when searching for -lm
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libm.a when searching for -lm
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.a when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/librt.so when searching for -lrt
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/librt.a when searching for -lrt
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.so when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libdl.a when searching for -ldl
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.so when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libpthread.a when searching for -lpthread
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.so when searching for -lc
    /opt/arm-linux-gnueabi/bin/../lib/gcc/arm-linux-gnueabi/4.2.4/../../../../arm-linux-gnueabi/bin/ld: skipping incompatible /usr/lib/libc.a when searching for -lc
    libtool: install: warning: remember to run `libtool --finish /usr/lib/gstreamer-0.10'
    libtool: install: warning: `../gst/libgstreamer-0.10.la' has not been installed in `/usr/lib'
    libtool: install: warning: `../gst/libgstreamer-0.10.la' has not been installed in `/usr/lib'
    libtool: install: warning: `../gst/libgstreamer-0.10.la' has not been installed in `/usr/lib'
    libtool: install: warning: `../gst/libgstreamer-0.10.la' has not been installed in `/usr/lib'
    libtool: install: warning: `../gst/libgstreamer-0.10.la' has not been installed in `/usr/lib'
            Checking dependencies for liboil-0.3.15
            Compiling and installing liboil-0.3.15...
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    configure: WARNING: In the future, Autoconf will not detect cross-tools
    whose name does not start with the host triplet.  If you think this
    configuration is useful to you, please write to autoconf@gnu.org.
    cmp: liboilarray.c: No such file or directory
            Checking dependencies for gst-plugins-base-0.10.23
            Compiling and installing gst-plugins-base-0.10.23...
    configure: WARNING: unrecognized options: --disable-schemas-install
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    configure: WARNING: using cross tools not prefixed with host triplet
    configure: WARNING: *** gio pre-configured not to be built
    ../src/configure: line 31773: win32/common/config.h-new: No such file or directory
    configure: WARNING: unrecognized options: --disable-schemas-install
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: install: warning: relinking `libgstaudio-0.10.la'
    libtool: relink: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: install: warning: relinking `libgstcdda-0.10.la'
    libtool: relink: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: relink: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: install: warning: relinking `libgstriff-0.10.la'
    libtool: relink: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: relink: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: relink: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: install: warning: relinking `libgstapp.la'
    libtool: relink: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: relink: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: install: warning: relinking `libgstaudioconvert.la'
    libtool: relink: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: relink: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: install: warning: relinking `libgstplaybin.la'
    libtool: install: warning: relinking `libgstdecodebin.la'
    libtool: install: warning: relinking `libgstdecodebin2.la'
    libtool: install: warning: relinking `libgstvideoscale.la'
    libtool: relink: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: relink: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: install: warning: relinking `libgstvolume.la'
    libtool: relink: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: relink: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: relink: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: install: warning: relinking `libgstalsa.la'
    libtool: relink: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: relink: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
          Compiling and installing gst-plugins-bad-0.10.13...
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    configure: WARNING: using cross tools not prefixed with host triplet
    configure: WARNING: Not building real plugin, only works on 32bit and 64bit x86 platforms
    ../../../src/gst/aacparse/gstbaseparse.c: In function ‘gst_base_parse_finalize’:
    ../../../src/gst/aacparse/gstbaseparse.c:321: warning: dereferencing type-punned pointer will break strict-aliasing rules
    ../../../src/gst/aacparse/gstbaseparse.c:324: warning: dereferencing type-punned pointer will break strict-aliasing rules
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    ../../../src/gst/amrparse/gstbaseparse.c: In function ‘gst_base_parse_finalize’:
    ../../../src/gst/amrparse/gstbaseparse.c:321: warning: dereferencing type-punned pointer will break strict-aliasing rules
    ../../../src/gst/amrparse/gstbaseparse.c:324: warning: dereferencing type-punned pointer will break strict-aliasing rules
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    ../../../src/ext/alsaspdif/alsaspdifsink.c: In function ‘alsaspdifsink_get_time’:
    ../../../src/ext/alsaspdif/alsaspdifsink.c:315: warning: format ‘%d’ expects type ‘int’, but argument 8 has type ‘snd_pcm_sframes_t’
    ../../../src/ext/alsaspdif/alsaspdifsink.c:315: warning: format ‘%d’ expects type ‘int’, but argument 9 has type ‘snd_pcm_sframes_t’
    ../../../src/ext/alsaspdif/alsaspdifsink.c:315: warning: format ‘%d’ expects type ‘int’, but argument 10 has type ‘snd_pcm_sframes_t’
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    ................. done.
    ................. done.
    ................. done.
    ................. done.
    .................. done.
    .................. done.
    ................ done.
    ................ done.
    .................... done.
    ................. done.
    ................. done.
    ................ done.
    ................. done.
    ................. done.
    ................ done.
    .................. done.
    ................... done.
          Checking dependencies for gst-plugins-good-0.10.14
          Compiling and installing gst-plugins-good-0.10.14...
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    configure: WARNING: using cross tools not prefixed with host triplet
    configure: WARNING: building experimental plug-ins
          Checking dependencies for gst-plugins-ugly-0.10.11
          Compiling and installing gst-plugins-ugly-0.10.11...
    configure: WARNING: unrecognized options: --disable-schemas-install
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    configure: WARNING: using cross tools not prefixed with host triplet
    configure: WARNING: header dvdread/nav_print.h from dvdread missing
    configure: WARNING: unrecognized options: --disable-schemas-install
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
    libtool: link: warning: `/home/beto/work/leo365/fs/fsdev//usr/lib/libgstreamer-0.10.la' seems to be moved
          Checking dependencies for gst-tracelib-0.2
          Compiling and installing gst-tracelib-0.2...
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
    configure: WARNING: using cross tools not prefixed with host triplet
          Checking dependencies for i2c-tools-3.0.2
          Compiling and installing i2c-tools-3.0.2...
          Checking dependencies for ipipe_init
          Compiling and installing ipipe_init...
          Checking dependencies for jpeg-6b
          Compiling and installing jpeg-6b...
          Checking dependencies for libpng-1.2.8
          Compiling and installing libpng-1.2.8...
          Checking dependencies for mtdutils-1.0.0
          Compiling and installing mtdutils-1.0.0...
    flashcp.c:258:2: warning: #warning "Check for smaller erase regions"
          Checking dependencies for psplash
          Compiling and installing psplash...
    configure: WARNING: If you wanted to set the --build type, don't use --host.
        If a cross compiler is detected then cross compile mode will be used.
          Checking dependencies for sysvinit
          Compiling and installing sysvinit...
        Entering /home/beto/work/leo365/toolchain...
          Build complete
        Entering arch...
          Checking dependencies for base
          Compiling and installing base...
        Entering mach...
          Checking dependencies for base
          Compiling and installing base...
        Entering proprietary_src...
          Checking dependencies for dvsdk_3_10_00
          Compiling and installing dvsdk_3_10_00...
    Removing generated files..
    Executing make clean in subdirectory audio_decode1/...
    Removing generated files..
    Executing make clean in subdirectory audio_decode_io/...
    Removing generated files..
    Executing make clean in subdirectory audio_decode_io1/...
    Removing generated files..
    Executing make clean in subdirectory audio_encode1/...
    Removing generated files..
    Executing make clean in subdirectory audio_encode_io1/...
    Removing generated files..
    Executing make clean in subdirectory image_decode_io/...
    Removing generated files..
    Executing make clean in subdirectory image_decode_io1/...
    Removing generated files..
    Executing make clean in subdirectory image_encode_io/...
    Removing generated files..
    Executing make clean in subdirectory image_encode_io1/...
    Removing generated files..
    Executing make clean in subdirectory speech_decode1/...
    Removing generated files..
    Executing make clean in subdirectory speech_decode_io1/...
    Removing generated files..
    Executing make clean in subdirectory speech_encode1/...
    Removing generated files..
    Executing make clean in subdirectory speech_encode_io1/...
    Removing generated files..
    Executing make clean in subdirectory video_decode_io/...
    Removing generated files..
    Executing make clean in subdirectory video_decode_io2/...
    Removing generated files..
    Executing make clean in subdirectory video_display/...
    Removing generated files..
    Executing make clean in subdirectory video_encode_io/...
    Removing generated files..
    Executing make clean in subdirectory video_encode_io1/...
    Removing generated files..
    Executing make clean in subdirectory video_encode_io_multich1/...
    Removing generated files..
    Executing make clean in subdirectory video_loopback/...
    Removing generated files..
    Executing make clean in subdirectory video_loopback_blend/...
    Removing generated files..
    Executing make clean in subdirectory video_loopback_convert/...
    Removing generated files..
    Executing make clean in subdirectory video_loopback_copy/...
    Removing generated files..
    Executing make clean in subdirectory video_loopback_resize/...
    Removing generated files..
    Cleaning all in subdirectory dm365...
    Removing generated files..
    Removing generated files..
    Removing generated files..
    Removing generated files..
    Removing generated files..
    js: "./config.bld", line 10: Error: utils.loadCapsule: can't find 'common.bld' along the path '/home/beto/work/leo365/proprietary/dvsdk_3_10_00/dvsdk_3_10_00_19/xdctools_3_16_01_27/packages/gnu/targets/;/home/beto/work/leo365/proprietary/dvsdk_3_10_00/dvsdk_3_10_00_19/xdctools_3_16_01_27/packages;../..;'
    js: "./config.bld", line 10: Error: utils.loadCapsule: can't find 'common.bld' along the path '/home/beto/work/leo365/proprietary/dvsdk_3_10_00/dvsdk_3_10_00_19/xdctools_3_16_01_27/packages/gnu/targets/;/home/beto/work/leo365/proprietary/dvsdk_3_10_00/dvsdk_3_10_00_19/xdctools_3_16_01_27/packages;../..;'
    js: "./config.bld", line 10: Error: utils.loadCapsule: can't find 'common.bld' along the path '/home/beto/work/leo365/proprietary/dvsdk_3_10_00/dvsdk_3_10_00_19/xdctools_3_16_01_27/packages/gnu/targets/arm/;/home/beto/work/leo365/proprietary/dvsdk_3_10_00/dvsdk_3_10_00_19/xdctools_3_16_01_27/packages;../../..;'
    js: "./config.bld", line 10: Error: utils.loadCapsule: can't find 'common.bld' along the path '/home/beto/work/leo365/proprietary/dvsdk_3_10_00/dvsdk_3_10_00_19/xdctools_3_16_01_27/packages/gnu/targets/arm/;/home/beto/work/leo365/proprietary/dvsdk_3_10_00/dvsdk_3_10_00_19/xdctools_3_16_01_27/packages;../../..;'
        Entering myapps...
        Installing proprietary code
        Installing overlay
        Building file system target image(s)
          Generating file system jffs2...
        Build complete
      Processing bootloader...
            Applying patches...
    Applying patch dm365_leopard_support.patch
    Now at patch dm365_leopard_support.patch
          Processing TI Flash Utilities 1.5...
            Applying patches...
    Applying patch rr-sdk-integration.patch
    Now at patch rr-sdk-integration.patch
            Building Bin Creator (BC)...
            Building ECC generator (GENECC)...
            Building Serial Flasher Target (SFT)...
            Building Serial Flasher Host (SFH)...
            Building Serial Loader Target (SLT)...
            Building Serial Loader Host (SLH)...
            Building User Bootloader (UBL)...
        
          Processing U-Boot...
            Configuring...
    Configuring for davinci_dm365_evm board...
            Building...
          Building uncompress uImages for bootloader
          TFTP directory found at /srv/tftp, loading components there
        Build complete
      Processing installer...

  • Hi,

    When the board starts stop the autoboot so you get to u-boot console. Then try

     setenv autoload no

     dhcp

    You should get an IP address from your DHCP server. If not, then this could be happening:

    1) You don't have your network cable plugged in

    2) Something on the ethernet HW is damaged.

    3) Your DHCP server is misbehaving or does not exist.

    If any of those is your case, do 'printenv' on u-boot and paste the output. That may give us a clue

    Regards,

    Pablo Barrantes
    Embedded Software Engineer
    RidgeRun

  • hi sir

    I got my leopard board boot image erased from the board. Now nothing is shown at the terminal ie, picocom & minicom; earlier it was like 

    LEOPARD 365# ....

    but now nothing is coming, terminal is waiting for some signal from the board. Before this incident my leo kernel got damaged

    and i was not able to perform make install operation. it is saying checksum is same so no need to install kernel again.

    after this the nand got erased and nothing coming up. i tried to recover from the sd card but i dont have u-boot environment in the terminal may be 

    bec it is not showing this symbol LEOPARD 365#

    what should i do to get back my leopard board working???? it is getting powered on but not booting, not even showing its name on terminal

     

    please help,very very very urgent, my entire project is stuck now

    Thanks & regards

    Arjun

  • Hi Arjun,

    You can try to create an SD card to restore the UBL and u-boot on the LeopardBoard 365.

    The package to create the SD card can be downloaded at www.leopardimaging.com/.../dm3xx_sd_boot-6_leopard.tgz and the procedure can be found at www.leopardimaging.com/.../sd_boot_readme.txt

    -Richard

  • Thank you very much for your immediate replay, i was very much worried about the functionality of the board . I will follow the text document as mentioned in the replay

    once again thank you for your time and support

    Arjun