Downloaded the JFFS2 image from RR website, dd to a SD card, SD-boot the board, let the installer finish its job, NAND-boot the board back. Played with the applications for a while, then got the following on the serial console,
JFFS2 notice: (1001) check_node_data: wrong data CRC in data node at 0x0808c490: read 0x7be02602, calculated 0xc406d4d4.JFFS2 notice: (1001) check_node_data: wrong data CRC in data node at 0x08089df0: read 0x542eb05f, calculated 0x7643f83f
Looks the nand jffs2 is corrupted? Any ideas pls? Thanks!
I was using the JFFS2 image and I can't reproduce your problem, what do you mean by "Played with the applications for a while"?
Carlos AgueroEmbedded Software EngineerRidgeRun
I was running the applications from the JFFS2 image, also mounted the nfs share, did some networking benchmarking. things like that. then rebooted the board, then got the msg. Not sure if they are something to worry about.
Also, could you please advise on the 720P component capturing? I tried all the images available for download from RR's site, did not find anyone that can exercise the Component/YPbPr 720P input (with HDI365)....
Also, somewhere from RR's site, it was mentioned that we will need th 368 SDK for 1080i/1080p capturing. Sent emails to firstname.lastname@example.org couple of times without success, everytime it failed with "no such address / account". Please advise.
Thanks again. Best wishes for the holidays and new year.
For component capturing there is a wiki that may help you:
About the JFFS2 issue, can't say too much right now, still no error happening.