HD Camera demo with Leopardboard 365 and Pico DLP

Sonia Ghelani is showing HD Camera video input demo with leopardboard 365 and Pico DLP. The demo is using 5M camera board and the captured video goes out to Pico DLP.

To download the demo, please, visit at: https://www.leopardimaging.com/Download.html

Nara

Comments
  • HD Camera demo with Leopardboard 365 and Pico DLP

    Dear Sir/Mam,

    I am using Dm-368 leopard board.But the problem with the board is that is not at all booting.

    When I am using windows hyper terminal and have set all the bit rate to 115200 and plugging the lan connection I am getting the error message as

    Jumping to entry point at 0x81080000.

    LSP 2.10 POST BETA RELEASE

    VERSION: 2.10.010.03

    U-Boot 1.3.4-svn56 (Mar 24 2011 - 13:53:45)

    I2C:   ready

    DRAM:  128 MB

    NAND:  NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3

    V 8-bit)

    Bad block table found at page 131008, version 0x01

    Bad block table found at page 130944, version 0x01

    256 MiB

    In:    serial

    Out:   serial

    Err:   serial

    Ethernet PHY: GENERIC @ 0x00

    NAND read: device 0 offset 0xc900000, size 0x800

    2048 bytes read: OK

    Current WDT flag is 0xffffffff

    NAND read: device 0 offset 0xc800000, size 0x800

    2048 bytes read: OK

    Current firmware update flag is 0xffffffff

    Hit any key to stop autoboot:  0

    NAND read: device 0 offset 0x800000, size 0x800000

    8388608 bytes read: OK

    Loading from NAND 256MiB 3,3V 8-bit, offset 0x400000

      Image Name:   Linux-2.6.18_pro500-davinci

      Image Type:   ARM Linux Kernel Image (uncompressed)

      Data Size:    1858436 Bytes =  1.8 MB

      Load Address: 80008000

      Entry Point:  80008000

    ## Booting kernel from Legacy Image at 80700000 ...

      Image Name:   Linux-2.6.18_pro500-davinci

      Image Type:   ARM Linux Kernel Image (uncompressed)

      Data Size:    1858436 Bytes =  1.8 MB

      Load Address: 80008000

      Entry Point:  80008000

      Verifying Checksum ... OK

      Loading Kernel Image ... OK

    OK

    Starting kernel ...

    Uncompressing Linux.............................................................

    ............................................................... done, booting th

    e kernel.

    Linux version 2.6.18_pro500-davinci (renxiang@renxiang-desktop) (gcc version 4.2

    .0 (MontaVista 4.2.0-16.0.32.0801914 2008-08-30)) #1 PREEMPT Sun May 23 21:06:24

    PDT 2010

    CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177

    Machine: DaVinci DM365 IPNC

    Memory policy: ECC disabled, Data cache writeback

    DaVinci DM0365 variant 0x8

    PLL0: fixedrate: 24000000, commonrate: 121500000, vpssrate: 243000000

    PLL0: vencrate_sd: 27000000, ddrrate: 243000000 mmcsdrate: 121500000

    PLL1: armrate: 297000000, voicerate: 99000000, vencrate_hd: 74250000

    CPU0: D VIVT write-back cache

    CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets

    CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets

    Built 1 zonelists.  Total pages: 29696

    Kernel command line: mem=116M console=ttyS0,115200n8 root=/dev/ram0 rw initrd=0x

    82000000,8M ip=off video=davincifb:vid0=OFF:vid1=OFF:osd0=1280x720x16,8000K dm36

    5_imp.oper_mode=0 davinci_capture.device_type=4

    Unknown boot option `dm365_imp.oper_mode=0': ignoring

    Unknown boot option `davinci_capture.device_type=4': ignoring

    PID hash table entries: 512 (order: 9, 2048 bytes)

    Clock event device timer0_0 configured with caps set: 07

    Console: colour dummy device 80x30

    Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

    Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

    Memory: 116MB = 116MB total

    Memory: 105344KB available (3181K code, 653K data, 184K init)

    Security Framework v1.0.0 initialized

    Capability LSM initialized

    Mount-cache hash table entries: 512

    CPU: Testing write buffer coherency: ok

    checking if image is initramfs...it isn't (bad gzip magic numbers); looks like a

    n initrd

    Freeing initrd memory: 8192K

    NET: Registered protocol family 16

    DaVinci: 104 gpio irqs

    MUX: initialized GPIO20

    MUX: initialized I2C_SCL

    MUX: initialized GPIO87

    Generic PHY: Registered new driver

    ch0 default output "COMPOSITE", mode "NTSC"

    VPBE Encoder Initialized

    SCSI subsystem initialized

    NET: Registered protocol family 2

    IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

    TCP established hash table entries: 4096 (order: 2, 16384 bytes)

    TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

    TCP: Hash tables configured (established 4096 bind 2048)

    TCP reno registered

    VFS: Disk quotas dquot_6.5.1

    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

    squashfs: version 3.1 (2006/08/19) Phillip Lougher

    JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.

    yaffs May 23 2010 21:02:19 Installing.

    SGI XFS with no debug enabled

    Initializing Cryptographic API

    io scheduler noop registered

    io scheduler anticipatory registered (default)

    LTT : ltt-facilities init

    LTT : ltt-facility-core init in kernel

    DAVINCI-WDT: DaVinci Watchdog Timer: heartbeat 60 sec

    Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled

    serial8250.0: ttyS0 at MMIO map 0x1c20000 mem 0xfbc20000 (irq = 40) is a 16550A

    serial8250.0: ttyS1 at MMIO map 0x1d06000 mem 0xfbd06000 (irq = 41) is a 16550A

    RAMDISK driver initialized: 1 RAM disks of 32768K size 1024 blocksize

    Davinci EMAC MII Bus: probed

    MAC address is deadbeaf

    TI DaVinci EMAC Linux version updated 4.0

    netconsole: not configured, aborting

    Linux video capture interface: v2.00

    Trying to register davinci display video device.

    layer=c29eae00,layer->video_dev=c29eaf60

    Trying to register davinci display video device.

    layer=c29eac00,layer->video_dev=c29ead60

    davinci_init:DaVinci V4L2 Display Driver V1.0 loaded

    i2c /dev entries driver

    nand_davinci nand_davinci.0: Using 4-bit hardware ECC

    NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit

    )

    Creating 5 MTD partitions on "nand_davinci.0":

    0x00000000-0x00080000 : "bootloader"

    0x00080000-0x00200000 : "params"

    0x00200000-0x00400000 : "kernel"

    0x00400000-0x01c00000 : "filesystem1"

    0x01c00000-0x10000000 : "filesystem2"

    nand_davinci nand_davinci.0: hardware revision: 2.3

    musb_hdrc: version 6.0, cppi-dma, peripheral, debug=0

    musb_hdrc musb_hdrc: No DMA interrupt line

    musb_hdrc: USB Peripheral mode controller at c7866000 using DMA, IRQ 12

    rtc_davinci_dm365 rtc_davinci_dm365.0: rtc intf: proc

    rtc_davinci_dm365 rtc_davinci_dm365.0: rtc intf: dev (254:0)

    rtc_davinci_dm365 rtc_davinci_dm365.0: rtc core: registered rtc_davinci_dm365 as

    rtc0

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    davinci-mmc davinci-mmc.0: Supporting 4-bit mode

    davinci-mmc davinci-mmc.0: Using DMA mode

    Advanced Linux Sound Architecture Driver Version 1.0.12rc1 (Thu Jun 22 13:55:50

    2006 UTC).

    ASoC version 0.13.1

    CQ0093 Voice Codec 0.1

    asoc: cq93vc <-> davinci-vcif mapping ok

    ALSA device list:

     #0: On-chip voice codec (cq93vc)

    IPv4 over IPv4 tunneling driver

    TCP bic registered

    NET: Registered protocol family 1

    NET: Registered protocol family 17

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    rtc wait time out !!!!!

    Time: timer0_1 clocksource has been installed.

    Clock event device timer0_0 configured with caps set: 08

    Switched to high resolution mode on CPU 0

    rtc_davinci_dm365 rtc_davinci_dm365.0: setting the system clock to 2000-09-14 01

    :01:01 (968893261)

    RAMDISK: Couldn't find valid RAM disk image starting at 0.

    yaffs: dev is 1048576 name is "ram0"

    yaffs: Attempting MTD mount on 1.0, "ram0"

    yaffs: dev is 1048576 name is "ram0"

    yaffs: Attempting MTD mount on 1.0, "ram0"

    XFS: bad magic number

    XFS: SB validate failed

    No filesystem could mount root, tried:  ext3 ext2 cramfs squashfs msdos vfat yaf

    fs yaffs2 xfs

    Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)

    Thanks and Regards.