Hi, RidgeRun just released the first SDK for DM365 Leopard Board!. The supported Ubuntu versions for this SDK are 9.04 and 9.10 in 32 bits. It includes the following features: * ARM toolchain: gcc 4.2.4. * u-boot 2009.11 with a set of patches for support the Leopard DM365 (bootloader installation...

gstrtpmanager: gstrtpssrcdemux: RTP SSRC Demux gstrtpmanager: gstrtpsession: RTP Session gstrtpmanager: gstrtpptdemux: RTP Demux gstrtpmanager: gstrtpjitterbuffer: RTP packet jitter-buffer gstrtpmanager: gstrtpclient: RTP Client gstrtpmanager: gstrtpbin: RTP Bin icydemux: icydemux: ICY tag demuxer smpte...

When attempting to make the DM365 SD flash utility, my attempt fails with the following: ian@magi:~/Desktop/dump/dm365_leoimaging/dm3xx_sd_boot-6_leopard$ make make -C sdcard_flash PLATFORM=DM36x all make[1]: Entering directory `/home/ian/Desktop/dump/dm365_leoimaging/dm3xx_sd_boot-6_leopard/sdcard_flash'...

While digging through the Angstrom Distro's "not quite ready for anything near prime time" repository, I noticed they have an unstable version of Angstrom for the DM365-evm. Has anyone attempted/managed to boot this distro on the Leopard DM365 yet? Cheers, Ian

Hi! Sorry for my bad English My serial port didn't work, so I used a serial USB adaptator. I have chosen as mean of communication: serial, with /dev/ttyUSB0 and as mean of installing image: serial When I run "make install" I have no problem but when I run "boot" (with...

After some mistakes, I wanted to reinstall Ridge Run SDK beta release 844703. I removed autoconf, libtool and suppress DM365SDK844703,xdctools and dvsdk directories. I ran sudo apt-get install libtool autoconf and ran autoreconf I installed dvsdk, xdctools and ridge run sdk I have no problem...

Hello Todd Thank you for your help. I. In my host computer: 1. When I connect the speaker to my host PC, it works: stephane@tamara:~/DM365SDK844703/myapps/gst-hello-app$ gst-launch filesrc location=bbb.ogg ! oggdemux ! vorbisdec ! audioconvert ! autoaudiosink Définition du pipeline...

Hey! When I run the following command: mariusze2@mariusze2-desktop:~/DM365SDK844703$ make install I got an error. It looks like this: Ridgerun Linux SDK Board configuration: Leopard Board DM365 Installation system of uboot images over TFTP for host 192.168.1.20 Please be sure u-boot is...

Hello, I think this question has been raised before but I am still trying to make it work: can I use the HD USB demo (Leopard Board) in Linux? I.e. connect the Leopard Board to my computer through USB? Actually, I have been trying doing that (with Ubuntu 10) and here are the results that I have...

We need the uboot source code. We work with DVSDK 3.1 with the linux-davinci-staging Linux. The free RidgerRun EVM SDK produces a working uboot, but it does not recognize the Ethernet phy. The free RidgerRun Leopard SDK produces a working uboot that can not program the flash (like saving the...

Hi everyone, I am doing a test to connect an USB serial device to Leopard DM365. The USB serial chipset could be FTDI or Prolific PL-2303. My purpose is to read/write data via this serial device to another device. I changed the jumpers via HW user guide and downloaded Ridgerun Linux SDK. However,...

Hi everyone, I have a little problem and I have run out of ideas; I am trying to use DMAI to capture frames from the LI-5M03. I can successfully used Gstreamer (gst-launch and in code) to grab frames without too much hassle but using pure DMAI it fails. I added " Dmai_setLogLevel(Dmai_LogLevel_All...

Hello, I had an idea to plug two cameras to the Leo 365 board. My idea is to have the usual HD camera (for example LI-5M04CM) on the ISIF port and run it in full like in the RidgeRun SDK or IPNC demo. As for the second camera, I would choose one of these from Sparkfun: http://www.sparkfun...

Hello everyone I have bought , the code of LeopardImaging " High Definition 720p USB Webcam " I want to make modifications to this code . Can someone explain where I can start ? Because I'm a bit lost . I want to store a text file on the SD card and change some parameters of the image,...

I have booted my leopardboard with MontaVista(R) Linux(R) Professional Edition 5.0.0. Now I want to get output on any screen, I read somewhere that I have to install Xserver ( or any other distribution of xserver) on leopardboard dm365 but I don't know the procedure. Please help.

I am pretty new to the embedded arena. I have been struggling with this Leopardboard DM365 for more than 3 weeks. I am trying to run demo, from DVSDK version 3.10.00.19 demos (dvsdk_demos_3_10_00_16 folder). In order to run the demo that was initially written for DM365EVM I removed all the parts...

Hi to all experts, I am in the phase of choosing a solution for a MPEG-2 720@30fps Codec (Encoder+ Decoder) and in near future 1080@30fps. As you know, there are many embedded options. I just wish to know, by DM368 board which bit rate can I have? have anybody developed a capable software for...

Hello, I am trying to run the decode demo from dvsdk 3.10.00.19 on my LeopardBoard DM365. I compiled it using RidgeRun's SDK. Since the demo was originally made for TI's DM365EVM, I had to remove from the code some parts that use features of EVM that are missing in Leopard (Keyboard...

Hi, I have a Leopardboard 365 , LI-5M03 camera board and DVI output board, download RidgeRun SDK from svn; download dvsdk_3_10_00_19 from TI web site. make config ok make ok make installbootloader ok make install ok setenv bootargs 'davinci_enc_mngr.ch0_output=DVI davinci_enc_mngr...

Hello, I would like to rotate a video in my Gstreamer pipeline (using RR SDK 2011Q2 on DM365). When trying this, I am getting an error ("WARNING: erroneous pipeline: could not link v4l2src0 to videoflip0"): ipipe-client run-config-script dm365_mt9p031_config; gst-launch -e v4l2src...

Hello, I would like to know if streaming video from my LeopardBoard 365 (with the 5M module and RidgeRun SDK) through TCP is faster than UDP. I created the following pipeline on board and it runs succesfully. gst-launch v4l2src always-copy=FALSE chain-ipipe=true ! video/x-raw-yuv,format=\(fourcc...

I built and installed ipipe and librraew-demo using the RR SDK, but when I run "ipipe-client init-aew", I get the following error: / # ipipe-client init-aew AEW is not supported because ipipe was compiled without librraew / # I thought that I had compile ipipe with librraew using the...

Hello, I'm using the LeopardBoardDM365sdkEVAL2011Q2 and the gstreamer example pipelines at https://www.ridgerun.com/developer/wiki/index.php/LeopardBoard_365_GStreamer_Pipelines_-_SDK_2011Q2#Image_capture The VGA (640x480) example completes and takes a valid (but dark) picture, but the 720P...